Technical data

1. Measures
   
   • Length 8,350 mm
   • Width 2,500 mm with 600 tires
   • Height 3,440 mm
   • Clearence underneath the gear case 580 mm
   • Turn radius approx. 4,400 mm
   
   
2. Motor
   
   • Deutz 4-Cylinder water-cooled TCD 2013
   • Displacement 4,764 ccm
   • W 110T – 85 kW (116 DIN HP) at 2.300 U/min.
   • W 130T – 113 kW (154 DIN HP) at 2.300 U/min.
   • W 130T – 129 kW (176 DIN HP) at 2,300 U/min.
   • electrical engine control (EMR)
   • fuel tank approx. 160 l
   
   
3. Hydraulic system
   
   • Variable pump flow with electronic control 200 l/min. at 2,000 U/min.
   • System-pressure of max. 310 bar
   
   
4. Power transmission
   
   • Hydrostatic traction drive electronically controlled
   • 2-gear power divider with axle-interruption rear
   • front and rear axles are special-axles with planet power heads and in oil bath running fins-brakes
   • differential pawl 100%
   
   
5. Speed
   
   • First gear max. speed 0 – 14 km/h
   • Second gear max. speed 0 – 38 km/h
   
   
6. Electrical system
   
   • Electric tension 24 V
   • Battery capacity 2 x 92 Ah
   • Generator 80 A
   
   
7. Steering mechanism
   
   • Frame bending steering mechanism with 2 dual operating cylinders
   • For driving on the street steering orbitrol with emergency steering mechanism
   • Max. angle of turn +/- 46°
   
   
8. Cabin
   
   • Spaciously tiltable cabin with Lexan-Marard windows in the backstage danger zone
   • Warm water heater with fan and window defroster
   • Wipers in the front and in the back
   • At crane 2 x 4-axis joystick for all controls
   • Rotary seat with pedals – air-suspended
   • All important operating functions mounted at the seat
   • 8 working lights
   • cabins are ROPS, FOPS, OECD certificated
   
   
9. Tires
   
   E.g.
   • in the front – 600/60 – 30,5
   • in the back – 600/50 – 22,5
   • or other tires
   
   
10. Frame
    
    • The front frame of solid box-section with integrated oil tank
    • Rear frame in robust box construstion
    • Middle joint in solid finish with adjustable taper roller bearings
    • Torsion bedded through potent live ring +/- 22¡
    • Torsion brake through double-acting cylinders
    • Base tubs could be fold-away for maintenance
    
    
11. Crane
    
    E.g.
    • Loglift F71 FT85
    • or other cranes
    
    
12. Bunk
    
    • solid grid 4 pairs of stakes; the last 4 changeable; preparation for Klemmbank
    
    
13. Components & optional equipment
    
    In our brochure „Components and optional equipment” you can read up about our building-set-system and the individual possibilities of choices.
    
    
14. Communal equipment
    
    • On request – see infos –> prospects–> components & equipment
    
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    • Serial equipment
    • Optional equipment
    
    Configurations and technical changes are reserved.