Technical data

1. Measures
   
   • Length 6,455 mm
   • Width 2,500 mm with 600 tires
   • Height 3.175 mm depending on the tires
   • Clearence underneath the gear case up to 620 mm
   • Turn radius approx. 2,930 mm
   
   
2. Engine
   
   • Deutz 6-Cylinder water-cooled Turboengine
   • Displacement 7,150 ccm
   • 173 kW (235 HP) at 2,300 U / min.
   • Electrical engine control ( EMR )
   • Fuel tank approx. 180 l
   
   
3. Hydraulic system
   
   • Variable pump flow with 270 l/min. at 1,000 U / min.
   • System-preeure of max. 350 bar
   • Working pump 135 l at 1.000 U/min
   • Oil tank approx. 230 l
   
   
4. Power transmission
   
   • Hydrostatic traction drive electronically controlled
   • 2-gear power divider with axle-inrerruption rear
   • 6-gear ZF-Power-Shift-Gear
   • front and rear axles are special-axles with planet power heads and in oil bath running fins-brakes
   • Differential pawl 100 % seperately for each axle switchable
   
   
5. Speed
   
   • Speed 0-40 km / h
   • 2-sphere brake system
   
   
6. Electrical system
   
   • Wetronic Can-Bus system with memory for 5 drivers
   • Electric tension 24 V
   • Battery capacity 2 x 92 Ah
   
   
7. Steering mechanism
   
   • Frame bending steering mechansm with 2 dual operating cylinders
   • For driving on the street orbitrol with emergency steering mechanism
   
   
8. Cabin
   
   • Spaciously tiltable cabin with Lexan-Marard windous in the danger zone
   • Rotary seat with pedals - air suspended
   • All important operating functions mounted at the seat
   • 8 work lights, 4 therefrom in the back with Twinpower
   • Double-sided-entry and exit
   • Sliding windous in the doors
   • Skylight in 3 diffferent positions selectable
   • cabines are ROPS, FOPS, OECD certificated
   
   
9. Tires
   
   • Serial tires 23,1 – 26, in the back 600/55-26,5
   • Optionally a different tire is choosable
   
   
10. Frame
    
    • The front frame of solid box-section with integrated oil tank
    • Middle joint in solid finish with adjustable taper roller bearings
    • Lockable central-torsion with soid roll-rotating-assenbly
    • The rear frame drawn-out for the in the frame sunked winch
    • Lifting cylinder at the front rear with integrated cabincolled, damped oscillation thanks hydronuts
    
    
11. Crane
    
    E.g
    • Epsilon S 120 R 72
    
    
12. Klemmbank
    
    • Rear blade with or without tilt and Klemmbank
    
    
13. Forestry equipment
    
    • Dozer blade (towards additional charge with tilt cylinders 1.700 mm height of stroke)
    • Welte doublewinch HZM 14 with 14 to torque
    • Rear blade with double-roll-propeller
    
    
14. Communal equipment
    
    • On request – see infos –> prospects–> components & equipment
    
    
15. Components & optional equipment
    
    In our brochure „Components and optional equipment” you can read up about our building-set-system and the individual possibilities of choices.
    
    
    - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
    • Serial equipment
    • Optional equipment
    W - Welmatik
    L - Lastschaltgetriebe
    
    Configurations and technical changes are reserved.